Mounts for a Starlink Mini or Standard dish
Check the numbers before you order: the official roof rack mounts take bars of a set thickness and width, and neither takes round bars.
Wall Mount
Official Starlink accessory. Fits: Standard (V4).
Fixes the Standard dish to an exterior wall, typically high on a gable or fascia.
| Max overhang | 4 in |
| Package weight | 1.6 kg (3.5 lb) |
| Kit | mount, silicone, 2 lag screws, 20 cable clips |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Pivot Mount
Official Starlink accessory. Fits: Standard (V4).
Mounts the Standard dish on a sloped shingle roof with an adjustable swivel for aiming.
| Package weight | 1.9 kg (4.2 lb) |
| Kit | mount, sealant tape squares and strips, 2 lag screws, 20 cable clips |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Pipe Adapter Mount
Official Starlink accessory. Fits: Standard (V4).
Attaches the Standard dish to an existing metal pole.
| Pole diameter | 31-63 mm (1.25-2.5 in) |
| Pipe material | metal only, not PVC or plastic |
| Package weight | 0.971 kg (2.14 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Ridgeline Mount
Official Starlink accessory. Fits: Standard (V4).
Holds the Standard dish on a gable roof ridge using ballast weights instead of drilling.
| Roof | metal or shingle, under 45 degrees, not recommended for clay tile |
| Wind rating | up to 80 km/h (50 mph) |
| Ballast package weight | 25.3 kg (55.8 lb) |
| Mount package weight | 5.8 kg (12.8 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Mobility Mount
Official Starlink accessory. Fits: Standard (V4).
Permanently bolts the Standard dish to a vehicle rack or rail with a sealed fit.
| Mounting angle | 8 degrees |
| Fasteners | stainless steel |
| Package weight | 880 g (1.94 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
X-Frame Base
Official Starlink accessory. Fits: Standard (V4).
Freestanding ground base for quick or temporary Standard setups.
| Package weight | 2.9 kg (6.4 lb) |
| Kit | X-frame base, mast adapter, mast |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Standard 4 to Standard Actuated Mount Adapter
Official Starlink accessory. Fits: Standard (V4).
Lets a Standard dish sit on a mount made for the older Standard Actuated dish, so the mount need not be replaced.
| Works with mounts | Short Wall, Long Wall, Pivot, Ground Pole, Ridgeline (actuated versions) |
| Package weight | 1.4 kg (3.1 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Roof Rack Mount
Official Starlink accessory. Fits: Standard (V4).
Clamps the Standard dish to a vehicle roof rack and can be removed when not needed.
| Rack thickness | 15-44.5 mm (0.59-1.75 in) |
| Max rack width | 95 mm (3.74 in), or compatible T-slot |
| Package weight | 1.6 kg (3.5 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Router 3 Mount
Official Starlink accessory. Fits: Fit not stated by the source.
Wall bracket for the Router 3 that also stops cables being pulled out.
| Drill bit | 4 mm (5/32 in) without anchors, 7 mm (9/32 in) with anchors |
| Package weight | 0.34 kg (0.75 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Power Supply Mount
Official Starlink accessory. Fits: Fit not stated by the source.
Wall bracket for the Standard power supply that keeps the input cable from being pulled out.
| Drill bit | 4 mm without anchors, 7 mm with anchors |
| Package weight | 0.34 kg (0.75 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Mini Wall Mount
Official Starlink accessory. Fits: Mini.
Fixes the Mini to an exterior wall, typically high on a gable or fascia.
| Max overhang | 4 in |
| Drill bit | 6 mm (1/4 in) |
| Package weight | 1.5 kg (3.3 lb) |
| Kit | mount, silicone, 2 lag screws, 20 cable clips |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Mini Pivot Mount
Official Starlink accessory. Fits: Mini.
Mounts the Mini on a sloped shingle roof with a swivel for aiming.
| Drill bit | 6 mm (1/4 in) |
| Package weight | 1.8 kg (4.0 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Mini Mobility Mount
Official Starlink accessory. Fits: Mini.
Permanently bolts the Mini to a vehicle or boat surface with a sealed fit.
| Mounting angle | 9 degrees |
| Surfaces | wood, fiberglass, metal, plastic |
| Package weight | 0.6 kg (1.32 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Mini Roof Rack Mount
Official Starlink accessory. Fits: Mini.
Clamps the Mini to a vehicle roof rack and can be removed when not needed.
| Rack thickness | 12-48 mm (0.47-1.9 in) |
| Max rack width | 88 mm (3.5 in) |
| Round bars | not supported |
| Package weight | 0.6 kg (1.32 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Mini Pipe Adapter and Flat Mount
Official Starlink accessory. Fits: Mini.
Spare or replacement bracket for mounting the Mini to a pole or a flat surface.
| Fasteners | flat-mount fasteners not included |
| Package weight | 0.35 kg (0.77 lb) |
Source: Starlink accessory guide or spec sheet, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
NEEWER ST90 Roof Mount
Made by NEEWER. Fits: Mini.
Magnetic aluminium mount for placing the Mini on a metal vehicle roof without drilling.
| Magnet bases | 4 bases, 6 magnets each |
| Holding strength | 22 kg vertical (per-base or total not stated) |
| Weight | 1.35 kg |
| Dimensions | 26 x 30 cm |
| Base diameter | 65 mm |
Source: NEEWER's own listing, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Trio Mini Speedmount
Made by Trio Flatmount. Fits: Mini.
Low-profile vehicle mount for the Mini that attaches by magnets, suction, adhesive pads or bolts (sold separately).
| Material | UV-resistant ASA plastic |
| Dimensions | 321 x 283 x 46 mm |
| Weight | 1.8 lb (~816 g) |
| Install height | 45 mm |
| Speed tested | up to 120 mph (190 km/h) with rubber-coated magnets |
| Operating temp | -40 to 65 C |
Source: Trio Flatmount's own listing, checked October 19, 2026. Prices change often, so we link out instead of quoting one.
Other accessory types: power, cables, routers and mesh, cases.